亚洲码和欧洲尺码_国产精品一级毛片一区二区_久久99丝袜亚洲国产_五月天丁香在线观看网在线_老翁真厉害不倒枪

News Current location:HomeNews—Precautions for replacing lubricating grease
Precautions for replacing lubricating grease

1. The amount of lubricating grease added should be appropriate
Excessive fat addition can increase friction torque, raise temperature, and increase fat consumption; If the amount of grease added is too small, reliable lubrication cannot be obtained and dry friction occurs. Generally speaking, the appropriate amount of grease added is 1/3 to 1/2 of the total void volume inside the bearing. But depending on the situation, sometimes grease should be applied to the edge of the bearing to implement cavity lubrication.
2. Pay attention to preventing the mixing of lubricating grease
Avoid the cross use of grease containers and tools, otherwise it will have adverse effects on the grease, such as drop point drop, increased cone penetration, and decreased mechanical stability.
3. Pay attention to the work of replacing new grease
Due to the continuous improvement and changes in the variety and quality of lubricating grease, when using new lubricating grease for old equipment, it should be tested and put into trial before formal use; When replacing new grease, the waste lubricating grease should be removed first and the components should be cleaned thoroughly. When adding lubricating grease, the waste grease should be squeezed out until new grease is seen at the grease outlet.
4. Pay attention to the management of the process of adding lubricating grease
Before receiving and adding lubricating grease, strict attention should be paid to the cleanliness of containers and tools. The grease supply port on the equipment should be wiped clean in advance to prevent the mixing of mechanical impurities, dust, and sand particles.
5. Pay attention to timely replacement of seasonal grease
If the temperature difference between winter and summer plum varies greatly in the environment where the device is located, using winter fat or the opposite in summer will have the opposite effect.
6. Pay attention to regularly changing lubricating grease
The replacement time of lubricating grease should be determined according to specific usage conditions, ensuring reliable lubrication without causing waste of grease.
7. Do not use wooden or paper containers to package lubricating grease
To prevent oil loss, hardening, mixing with moisture, or contamination and deterioration, it should be stored in a cool and dry place.

Previous:Is it better to have more bearing grease? Next article:How to choose lubricating grease reasonably?
囊谦县| 自治县| 正蓝旗| 稻城县| 福建省| 砀山县| 阜康市| 惠东县| 河北区| 广饶县| 依兰县| 巴青县| 海晏县| 合肥市| 郎溪县| 克东县| 玉门市| 丹巴县| 潍坊市| 郑州市| 和平县| 社旗县| 墨竹工卡县| 三河市| 海口市| 临沭县| 合阳县| 铁力市| 临江市| 肇庆市| 日喀则市| 东光县| 鹰潭市| 韶关市| 蕉岭县| 兴化市| 磐石市| 类乌齐县| 油尖旺区| 隆化县| 涿州市|